ZyXEL Communications GS1900 Series - Page 103

Chapter 15 Monitor: LLDP
GS1900 Series User’s Guide
103
Each field is described in the following table.
Table 51 Monitor > LLDP > Overloading
LABEL DESCRIPTIO N
Port Overloading
Port This label shows the port you are viewing.
Total (Bytes) This field displays the total in bytes.
Left to Send (Bytes) This field displays what is left to send in bytes.
Status This field displays whether the Switch is overloading or not.
Bytes Detail This field displays how many bytes used by TLVs
Mandatory TLVs This field displays how many bytes used by mandatory TLVs.
MED Capabilities This field displays how many bytes used by MED capabilities.
MED Location This field displays how many bytes used by MED location.
MED Network
Policy
This field displays how many bytes used by MED network policy.
MED Extended
Power via MDI
This field displays how many bytes used by MED extended power through MDI.
802.3 TLVs This field displays how many bytes used by 802.3 TLVs.
Optional TLVs This field displays how many bytes used by optional TLVs.
MED Inventory This field displays how many bytes used by MED inventory.
802.1 TLVs This field displays how many bytes used by 802.1 TLVs.