Chapter 20 Configuration: VLAN
GS1900 Series User’s Guide
130
20.2.3 The Po rt Sc re e n
Use this screen to view port settings and select VLANs for configuration. Click C o nfig ura tio n > VLA N >
VLAN > Port to open this screen.
Fig ure 127 Configuration > VLAN > VLAN > Port
The following table describes the labels in this screen.
VLAN Name
Prefix
Enter a prefix for the VLAN name.
Apply Click A pp ly to save the changes.
Cancel Click C a nc e l to discard the changes.
Table 74 Configuration > VLAN > VLAN > VLAN > Add (continued)
LABEL DESCRIPTIO N
Table 75 Configuration > VLAN > VLAN > Port
LABEL DESCRIPTIO N
Port
Port Displays the port index number.
PVID A PVID (Port VLAN ID) is a tag that adds to incoming untagged frames received on a port so
that the frames are forwarded to the VLAN group that the tag defines.
Accept Frame
Type
Specify the type of frames allowed on a port. Choices are All, Ta g O nly and Unta g O nly.
Ingress Check If this check box is selected for a port, the Switch discards incoming frames for VLANs that do
not include this port in its member set.
To Next Page
Loading...
