Chapter 17 Monitor: Management
GS1900 Series User’s Guide
109
Fig ure 108 Monitor > Management > Error Disable
Each field is described in the following table.
Table 56 Monitor > Management > Error Disable
LABEL DESCRIPTIO N
Error Disable
Recovery Interval View the number of seconds (from 30 to 2592000) for the time interval of the recovery.
Reason Status
Error Disabled
Reason
This field displays the supported features that allow the Switch to shut down a port or
discard packets on a port according to the feature requirements and what action you
configure.
Timer Status Select this option to allow the Switch to wait for the specified time interval to activate a port
or allow specific packets on a port, after the error was gone. De-select this option to turn off
this rule.
Port Status
Port This field displays the port number.
Error Disabled
Reason
This field displays the supported features that allow the Switch to shut down a port or
discard packets on a port according to the feature requirements and what action you
configure.
Time Left (sec) This field displays the time left in seconds.
Action This field displays the action.
To Next Page
Loading...
