ZyXEL Communications GS1900 Series - Page 127

Chapter 19 Configuration: Port
GS1900 Series User’s Guide
127
Fig ure 124 Configuration > Port > Storm Control > Storm Control > Edit
The following table describes the labels in this screen.
Table 72 Configuration > Port > Storm Control > Storm Control > Edit
LABEL DESCRIPTIO N
Storm Control Port
Port List Displays the port list index numbers.
State Select Ena b le to activate traffic storm control on the ports.
Action Determines the action the device takes when a limit is reached. The following options are
available:
• Dro p – drop the packet when limit is reached.
• Shutdo wn – shutdown the connection when a limit is reached.
Broadcast (pps) Click the Ena ble checkbox to active the feature.
Enter the maximum number of broadcast packets the port can receive per second.
Unknown
Multicast (pps)
Click the Ena ble checkbox to active the feature.
Enter the maximum number of multicast packets the port can receive per second.
Unknown Unicast
(pps)
Click the Ena ble checkbox to active the feature.
Enter the maximum number of unicast packets the port can receive per second.
Apply Click A pp ly to save the changes.
Cancel Click C a nc e l to discard the changes.