Chapter 23 Configuration: Loop Guard
GS1900 Series User’s Guide
152
The following table describes the labels in this screen.
Table 100 Configuration > Loop Guard > Port > Edit
LABEL DESCRIPTIO N
Port
Port List Displays the list of port index numbers to be configured.
State Select to enable or disable the loop guard feature on the port.
Action Select to have the Switch shut down a port and/or generate a log message if it detects that
packets sent out on that port loop back to the Switch.
Apply Click A pp ly to save the changes.
Cancel Click C a nc e l to discard the changes.
To Next Page
Loading...
