Chapter 25 Configuration: Time Range Group
GS1900 Series User’s Guide
159
Fig ure 158 Configuration > Time Range Group > Edit (Periodic)
The following table describes the labels in this screen.
Fig ure 159 Configuration > Time Range Group > Edit (Periodic) > Add
The following table describes the labels in this screen.
Table 105 Configuration > Time Range Group > Edit (Periodic)
LABEL DESCRIPTIO N
Time Range Group
Name This field displays the descriptive name for this rule. This is for identification purpose only.
Type This field displays the type of the rule.
Index This field displays the index number of the rule.
Range This field displays the time periods to which this rule applies.
Action Click Edit to change the rule settings.
Click De le te to remove the rule.
Add Click Add to create a new range.
Table 106 Configuration > Time Range Group > Edit (Periodic) > Add
LABEL DESCRIPTIO N
Time Range Group
Name Enter a descriptive name for this rule for identifying purposes.
Type This field displays the type of the rule.
Range Select the first option if you want to define a recurring schedule for a consecutive time period.
You then select the day of the week, hour and minute when the schedule begins and ends
respectively.
Select the second option if you want to define a recurring schedule for multiple non-
consecutive time periods. You need to select each day of the week the recurring schedule is
effective. You also need to specify the hour and minute when the schedule begins and ends
each day. The schedule begins and ends in the same day.
To Next Page
Loading...
