ZyXEL Communications GS1900 Series - Page 177

Chapter 27 Configuration: Spanning Tree
GS1900 Series User’s Guide
177
Fig ure 178 Configuration > Spanning Tree > MST Port > Edit
The following table describes the labels in this screen.
Table 125 Configuration > Spanning Tree > MST Port > Edit
LABEL DESCRIPTIO N
STP MST Port
MST ID This displays the MST ID number.
Port List Enter the index number of the MTP ports.
Priority Configure the priority for each port here.
Priority decides which port should be disabled when more than one port forms a loop in a
switch. Ports with a higher priority numeric value are disabled first. The allowed range is between
0 and 255 and the default value is 128.
Internal Path
Cost (0=Auto)
Enter the internal path cost. Enter 0 for Auto.
Apply Click A pp ly to save the changes.
Cancel Click C a nc e l to discard the changes.