Chapter 2 Hardware Installation and Connection
GS1900 Series User’s Guide
27
Fig ure 9 Mounting the Switch on a Rack (GS1900-16, GS1900-24E, and GS1900-24EP)
Fig ure 10 Mounting the Switch on a Rack (GS1900-24, GS1900-24HP/GS1900-24HPv2, GS1900-48, and
GS1900-48HP/GS1900-48HPv2)
2 Using a #2 Philips screwdriver, install the M5 flat head screws through the mounting bracket holes into
the rack.
Note: Make sure you tighten all the four screws to prevent the Switch from getting slanted.
3 Repeat steps
1 and 2 to attach the second mounting bracket on the other side of the rack.
To Next Page
Loading...
