ZyXEL Communications GS1900 Series - Page 59

Chapter 6 Getting Start
GS1900 Series User’s Guide
59
Each field is described in the following table.
After clicking Ne xt, the finish screen appears.
Fig ure 61 Getting Start > VLAN> 3 Step 3 Finish
Each field is described in the following table.
Q o S
In QoS, you can create QoS settings, and view finished results.
In order to create QoS settings, please do the following. Click G e tting Sta rt > Q oS > 1 Ste p 1 Q oS (Q ua lity
o f Se rvic e ) to access this screen.
Table 17 Getting Start > VLAN > 2 Step 2 Tag VLAN Setting
LABEL DESCRIPTIO N
Currently VLAN ID This field displays the VLAN identification number.
Tag Ports belonging to the specified VLAN tag all outgoing frames transmitted.
Untag Ports belonging to the specified VLAN do not tag all outgoing frames transmitted.
Previous Click Pre vio us to show the previous screen.
Next Click Ne xt to show the next screen.
Table 18 Getting Start > VLAN > 3 Step 3 Finish
LABEL DESC RIPTION
Currently VLAN ID This field displays the VLAN identification number.
Tag Ports belonging to the specified VLAN tag all outgoing frames transmitted.
Untag Ports belonging to the specified VLAN do not tag all outgoing frames transmitted.
Previous Click Pre vio us to show the previous screen.
Finish Review the information and click Finish to create the task.