Need help?Do you have a question about the ZyXEL Communications GS1910 and is the answer not in the manual?
General| Model | GS1910 |
|---|---|
| Layer | Layer 2 |
| MAC Address Table Size | 8K |
| Jumbo Frame | 9KB |
| Power over Ethernet (PoE) | No |
| Management | Web GUI, CLI, SNMP |
| Storage Temperature | -40°C to 70°C |
| Ports | 8/24/48 |
| Operating Temperature | 0°C to 50°C |
| Humidity | 10% to 90% (non-condensing) |
Overview of switch features, models, and capabilities.
Describes the primary methods for managing the switch: Web Configurator and SNMP.
Provides essential practices for maintaining switch security and efficiency.
Step-by-step guide for placing the switch on a surface.
Instructions and requirements for installing the switch in a rack.
Details all ports, indicators, and connectors on the front of the switch.
Describes the components located on the rear panel of the switch.
Explains the function and status of each LED indicator on the switch.
Introduces the web-based interface for switch setup and management.
Guides users through the process of accessing the web configurator.
Overviews the layout and navigation elements of the web interface.
Instructions on how to change the administrator password for security.
Tutorial on configuring the switch's IP address for network management.
Guide to creating and managing user accounts and their permissions.
Covers backing up and restoring the switch's configuration.
Step-by-step instructions for setting up Virtual Local Area Networks.
Guide to creating a guest VLAN for unauthenticated network access.
Demonstrates using private VLANs for isolating traffic between ports.
Securing the network by preventing spoofed traffic using specific features.
Configuring the switch to facilitate DHCP requests across different network segments.
Combining multiple physical ports into a single logical link for increased bandwidth.
Copying network traffic to a destination port for analysis.
Optimizing multicast traffic flow by using IGMP snooping.
Implementing ACLs to filter network traffic based on defined criteria.
Procedure to reset the switch to its factory default settings.
Addresses common issues related to power, physical connections, and LED status.
Provides solutions for problems encountered when accessing or logging into the switch.
Copyright, disclaimer, and trademark notices.
Regulatory compliance and limited warranty information.
Details on open source software and critical safety precautions.
To Next Page