Chapter 5 Tutorials
GS1910/XGS1910 Series User’s Guide
47
3 Go to Configuration > Security > Network > DHCP > Snooping to activate DHCP snooping on
the Switch.
4 Specify whether ports are trusted or untrusted ports for DHCP snooping. Select Trusted in the
Mode field for port 5 because the DHCP server is connected to port 5. Set ports 6 and 7 to
Untrusted as they are connected to DHCP clients. Click Save.
5 Connect your DHCP server to port 5 and a computer (as DHCP client) to either port 6 or 7. The
computer should be able to get an IP address from the DHCP server. If you put the DHCP server on
port 6 or 7, the computer will not able to get an IP address.
To Next Page
Loading...
