Chapter 8 Security
WiMAX Device Configuration User’s Guide
137
8.11 IPSec VPN
The following figure helps explain the main fields in the web configurator.
Figure 77 IPSec Fields Summary
Click Security > IPSec VPN to open the General screen as shown next.
Figure 78 IPSec VPN
This screen contains the following fields:
Password Enter the password for connecting to the L2TP server.
Retype Retype the password for connecting to the L2TP server.
Get IP
automatically
Select Yes to have the L2TP server assign a local IP address to the client.
Assign IP Address Enter the IP address for the client. Ensure that the IP address is configured to be
allowed on the L2TP server.
Idle Timeout Enter the time in minutes to timeout L2TP connections.
Table 58 L2TP Client: Add (continued)
LABEL DESCRIPTION
Table 59 IPSec VPN
LABEL DESCRIPTION
# This is the VPN policy index number.
Name Enter the name of the VPN connection.
Enabled This displays if the VPN policy is enabled.
Local Endpoint This displays the IP address of the WiMAX Device.
Remote Endpoint This displays the IP address of the remote IPSec router.
Local Network This displays the single (static) IP address on the LAN behind your WiMAX Device
or the IP address and subnet mask of a network behind your WiMAX Device.
Local Network
Local IP Address
Remote Network
Remote IP Address
Remote
IPSec Router
VPN Tunnel
To Next Page
Loading...
