Chapter 4 Tutorials
WiMAX Device Configuration User’s Guide
49
1 Open the Maintenance > Remote MGMT > HTTP screen.
2 Select Enable in both HTTP Server and HTTPS Server sections and leave the Port Number
settings as “80” and “443”.
3 Select Allow Connection from WAN. This allows remote management connections not only from
the local network but also the WAN network (Internet).
4 Click Save.
4.11 Changing Certificate to Communicate with Other
Networks
This tutorial shows you how to import a new security certificate, which allows your device to
communicate with other network servers.
Goal: Import a new security certificate into the WiMAX Device.
See Also: Appendix B on page 211.
1 Go to the WiMAX > Profile > Authentication Settings screen. In the EAP Supplicant section,
click each Browse button and locate the security certificates that were provided by your new ISP.
s
To Next Page
Loading...
