Chapter 4 Tutorials
WiMAX Device Configuration User’s Guide
50
2 Configure your new Internet access settings based on the information provided by the ISP.
Note: You can also use the Internet Connection Wizard to configure the Internet access
settings.
3 You may need to configure the Options section according to the information provided by the ISP.
4 Click Save. You should now be able to connect to the Internet through your new service provider!
4.12 Using Virtual Networks
This section shows VLAN configuration scenarios.
See Section 7.20 on page 119 if you need more information about VLAN.
Before enabling VLANs you will need to change the WiMAX Device to bridge mode.
To Next Page
Loading...
