Chapter 4 Tutorials
WiMAX Device Configuration User’s Guide
36
4.3 Setting Up a Small Network for the LAN
This tutorial shows you how to set up a small network in your office or home.
Goal: Connect three computers to your WiMAX Device to form a small network.
Required: The following table provides a summary of the information you will need to complete
the tasks in this tutorial.
1 In the Web Configurator, open the Network Setting > LAN screen and set the IP Address to
192.168.100.1. Use the default IP Subnet Mask of 255.255.255.0. Click Save.
2 Manually change the IP address of your computer that your are using to 192.168.100.x (for
example, 192.168.100.5) and keep the subnet set to 255.255.255.0.
3 Type http://192.168.100.1
in your browser after the WiMAX Device finishes starting up completely.
INFORMATION VALUE SEE ALSO
LAN IP Address 192.168.100.1 Chapter 7 on page 98
Starting IP Address 192.168.100.10 Chapter 7 on page 99
Ending IP Address 192.168.100.30
DNS Servers From ISP
To Next Page
Loading...
