Chapter 3 Setup Wizard
WiMAX Device Configuration User’s Guide
29
Figure 11 Setup Wizard > WiMAX Authentication Settings
The following table describes the labels in this screen.
Table 7 Setup Wizard > WiMAX Authentication Settings
LABEL DESCRIPTION
Authentication
Authentication
Mode
Select a WiMAX authentication mode for authentication network sessions with the
ISP. Options are:
• No authentication
• User authentication
• Device authentication
• User and Device authentication
EAP Supplication
EAP Mode Select an EAP authentication mode. See Table 14 on page 76 if you need more
information.
Anonymous Id Enter your anonymous ID.
Note: Some modes may not require this.
Ignore Cert
Verification
Select this to ignore base station certification verification when a certificate is
received during EAP-TLS or EAP-TTLS.
To Next Page
Loading...
