Chapter 4 Tutorials
WiMAX Device Configuration User’s Guide
39
3 Click Save to save your settings.
4 Click VoIP > Account > SIP.
5 Select the Enable checkbox and enter the parameters provided in the SIP Account section.
6 Click Save to save your settings.
7 Click VoIP > Account > Status. Click Connect to to register the WiMAX Device to the register
server. If the Register Status is Registered, it is ready to use. If this field shows Register Fail,
contact your VoIP provider to confirm that you have the correct settings and that your account is
active.
To Next Page
Loading...
