Chapter 4 Tutorials
WiMAX Device Configuration User’s Guide
60
2 Next, configure the Name, VID and Ports for the Filter Setting. Interfaces LAN1 and WiMAX
are Trunk links. On the WiMAX interface the WiMAX Device will recognize VLAN 5 and VLAN 10
tagged packets it receives from the VLAN supporting switch. VLAN tagged packets will also be
forwarded out of these interfaces. On the LAN1 interface, the WiMAX Device will tag packets it
receives so that they are recognized in VLAN 10. On LAN1, tagged packets will be untagged when
they are forwarded out, since PC A does not support VLAN tagged packets. Interface IAD is
configured as an Access port, so tagged packets will be untagged when they are forwarded.
To Next Page
Loading...
