33
4.1 Network
Use the TCP/IP screen to have the NAS use a dynamic or static IP address,
subnet mask, default gateway and DNS servers.
Network screen
Select how to use the NAS’s two Gigabit Ethernet interfaces.
Teaming Mode
Stand Alone: Select this option to use a separate IP address on each of the two
Gigabit Ethernet interfaces.
Link Aggregation: Select this option to use IEEE 802.3ad port link aggregation to
combine the two Gigabit Ethernet interfaces into a single logical link.
Select Teaming mode for
NAS540
To Next Page
Loading...
