52
3.6
SMART
S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology; often
written as SMART) is a monitoring system included in hard disk drives
(HDDs) and solid-state drives (SSDs) that detects and reports on various
indicators of drive reliability, with the intent of enabling the anticipation of
hardware failures.
Using this application, users can monitor hard disks. It notifies users ahead
of time of any issues that can result to the hard disk's poor performance or
failure.
3.6.1 Installing SMART from the Package Management
STEPS
Log into the NAS using NAS Starter Utility or a Web browser.
Click System Setting > Firmware/Packages > Package.
Click Retrieve List From Internet, select the SMART package from the
table and click the Install/Upgrade button (Figure 125).
Figure 125.
Click Apply to install the SMART package (Figure 126).
Figure 126.
To Next Page
Loading...
