1
Chapter 1 – Applications
1. NAS Starter Utility
1.1 NAS Starter Utility Installation
After you install a new hard drive on the NSA325 v2, please make sure to use
the NAS Starter Utility to discover and access the NSA325 v2 to assign an IP
address by the DHCP server or a static option. The steps are as below.
a. Double-click setup.exe. NSU_2.10_build_1057
b. Click “Next” to begin the installation.
Figure 1. Click “Next”. Figure 2. Select a folder to install the utility.
Figure 3. Click “Install”. Figure 4. NSU Installation is processing.
To Next Page
Loading...
