Chapter 1 Introduction
NSG Series User’s Guide
11
Monitor Menu
The monitor menu screens display status and information about the connected USB device.
Configuration Menu
Use the configuration menu screens to configure the NSG’s features.
Maintenance Menu
Use the maintenance menu screens to run diagnostics for troubleshooting, capture network traffic to
identify network problems, and ping or traceroute an IP address.
1.5.4 Tables and Lists
Web Configurator tables and lists are flexible with several options for how to display their entries.
Click a column heading to sort the table’s entries according to that column’s criteria.
Figure 5 Sorting Table Entries by a Column’s Criteria
Click the down arrow next to a column heading for more options about how to display the entries. The
options available vary depending on the type of fields in the column. Here are some examples of what
you can do:
Table 4 Monitor Menu Screens Summary
FOLDER OR LINK TAB FUNCTION
USB Storage Storage
Information
Displays details about USB device connected to the NSG.
Table 5 Configuration Menu Screens Summary
FOLDER OR LINK TAB FUNCTION
Interface Ethernet Manage Ethernet interfaces and virtual Ethernet interfaces.
SSH SSH Configure SSH server and SSH service settings.
User User Create and manage users.
USB Storage Settings Configure the settings for the connected USB devices.
Table 6 Maintenance Menu Screens Summary
FOLDER
OR LINK
TAB FUNCTION
Diagnostics Diagnostics Collect diagnostic information.
Packet Capture Capture packets for analysis.
Network Tool Identify problems with the connections. You can use Ping or TraceRoute to help
you identify problems.
To Next Page
Loading...
