Chapter 4 Configuration
NSG Series User’s Guide
20
Figure 16 Configuration > Network > Interface > Ethernet > Edit (Ethernet Fixed IP)
PPPoE
Select PPPoE if you want to connect to the Internet using a dial-up connection. This way, you do not
have to install or manage PPPoE software on each computer in the network.
• Select an authentication protocol for outgoing connection requests. Options are:
• CHAP/PAP - Your NSG accepts either CHAP or PAP when requested by the remote node.
• CHAP - Your NSG accepts CHAP only.
• PAP - Your NSG accepts PAP only.
• MSCHAP - Your NSG accepts MSCHAP only.
• MSCHAP-V2 - Your NSG accepts MSCHAP-V2 only.
• Enter the user name and password given to you by your ISP.
•Select Nailed-Up if you do not want the connection to time out.
Configuration > Network > Interface > Ethernet > Edit (Internal Type)
Figure 17 Configuration > Network > Interface > Ethernet > Edit (PPPoE)
To Next Page
Loading...
