Chapter 1 Introduction
NSG Series User’s Guide
9
3 Type the user name (default: “admin”) and password (default: “1234”). If the NSG is being managed or
has been managed by the NCC, check the NCC's Site-Wide > Configure > General setting screen for
the NSG's current password.
4 Click Login. After you log in for the first time using the default user name and password, you must
change the default admin password in the Update Admin Info screen. Type a new password of up to 63
printable characters without spaces, then click Apply.
5 The Login screen appears after you click Apply.
To Next Page
Loading...
