ZyXEL Communications NWA-3160 Series - Figure 72 Layer-2 Isolation Example Configuration; Figure 73 Layer-2 Isolation Example 1; Layer-2 Isolation Example 1; Layer-2 Isolation Example 2

Chapter 9 Other Wireless Configuration
ZyXEL NWA-3160 Series User’s Guide
127
" When configuring, remember to select the correct layer-2 isolation profile in the
WIRELESS > SSID > Edit screen of the relevant SSID profile.
Figure 72 Layer-2 Isolation Example Configuration
9.3.1.1 Layer-2 Isolation Example 1
In the following example wireless clients 1 and 2 can communicate with file server C, but not
access point B or wireless client 3.
•Enter C’s MAC address in the MAC Address field, and enter “File Server C” in the
Description field.
Figure 73 Layer-2 Isolation Example 1
9.3.1.2 Layer-2 Isolation Example 2
In the following example wireless clients 1 and 2 can communicate with access point B and
file server C but not wireless client 3.
• Enter the server’s and your ZyXEL Device’s MAC addresses in the MAC Address fields.
Enter “File Server C” in C’s Description field, and enter “Access Point B” in B’s
Description field.
00:00:c5:00:00:66
00:00:c5:00:00:cc