ZyXEL Communications NWA-3160 Series - Figure 123 802 Attribute Setting for Tunnel-Medium-Type; Figure 124 VLAN ID Attribute Setting for Tunnel-Pvt-Group-ID

Chapter 16 VLAN
ZyXEL NWA-3160 Series User’s Guide
194
Figure 123 802 Attribute Setting for Tunnel-Medium-Type
13 Return to the RADIUS Attribute Screen shown as Figure 122 on page 193.
• Select Tunnel-Pvt-Group-ID.
• Click Add.
14 The Attribute Information screen displays.
•In the Enter the attribute value in: field select String and type a number in the range 1 to
4094 or a Name for this policy. This Name should match a name in the VLAN mapping
table on the ZyXEL Device. Wireless stations belonging to the VLAN Group specified in
this policy will be given a VLAN ID specified in the ZyXEL Device VLAN table.
• Click OK.
Figure 124 VLAN ID Attribute Setting for Tunnel-Pvt-Group-ID
15 Return to the RADIUS Attribute Screen shown as Figure 122 on page 193.
• Select Tunnel-Type.
• Click Add.
16 The Enumerable Attribute Information screen displays.
• Select Virtual LANs (VLAN) from the attribute value drop-down list box.
• Click OK.