ZyXEL Communications NWA-3160 Series - Introducing the Web Configurator; Accessing the Web Configurator

ZyXEL NWA-3160 Series User’s Guide
41
CHAPTER 2
Introducing the Web
Configurator
This chapter describes how to access the ZyXEL Device’s web configurator and provides an
overview of its screens.
2.1 Accessing the Web Configurator
1 Make sure your hardware is properly connected and prepare your computer or computer
network to connect to the ZyXEL Device (refer to the Quick Start Guide).
2
Launch your web browser.
3
Type "192.168.1.2" as the URL (default).
4
Type "1234" (default) as the password and click Login. In some versions, the default
password appears automatically - if this is the case, click Login.
5
You should see a screen asking you to change your password (highly recommended) as
shown next. Type a new password (and retype it to confirm) then click Apply.
Alternatively, click Ignore.
" If you do not change the password, the following screen appears every time
you login.