ZyXEL Communications NWA-3160 Series - Entering the Password; Figure 143 Initial Screen

Chapter 18 Introducing the SMT
ZyXEL NWA-3160 Series User’s Guide
210
Figure 143 Initial Screen
18.2.2 Entering the Password
The login screen appears after you press [ENTER], prompting you to enter the password, as
shown below.
For your first login, enter the default password “1234”. As you type the password, the screen
displays an “X” for each character you type.
Bootbase Version: V1.05 | 03/23/2007 11:39:53
RAM:Size = 32 Mbytes
DRAM POST: Testing: 32608K OK
DRAM Test SUCCESS !
FLASH: AMD 32M
ZyNOS Version: V3.60(AAL.0)b1 | 04/13/2007 19:40:56
Press any key to enter debug mode within 3 seconds.
..........................................................
..
Copyright (c) 1994 - 2007 ZyXEL Communications Corp.
initialize ch =0, ethernet address: 00:13:49:DF:42:A8
initialize ch =1, ethernet address: 00:13:49:DF:42:A8
initialize ch =2, ethernet address: 00:13:49:DF:42:A9
initialize ch =3, ethernet address: 06:13:49:DF:42:A8
initialize ch =4, ethernet address: 0A:13:49:DF:42:A8
initialize ch =5, ethernet address: 0E:13:49:DF:42:A8
initialize ch =6, ethernet address: 12:13:49:DF:42:A8
initialize ch =7, ethernet address: 16:13:49:DF:42:A8
initialize ch =8, ethernet address: 1A:13:49:DF:42:A8
initialize ch =9, ethernet address: 1E:13:49:DF:42:A8
initialize ch =10, ethernet address: 06:13:49:DF:42:A9
initialize ch =11, ethernet address: 0A:13:49:DF:42:A9
initialize ch =12, ethernet address: 0E:13:49:DF:42:A9
initialize ch =13, ethernet address: 12:13:49:DF:42:A9
initialize ch =14, ethernet address: 16:13:49:DF:42:A9
initialize ch =15, ethernet address: 1A:13:49:DF:42:A9
initialize ch =16, ethernet address: 1E:13:49:DF:42:A9
initialize ch =17, ethernet address: 00:13:49:DF:42:A8
initialize ch =18, ethernet address: 00:13:49:DF:42:A8
initialize ch =19, ethernet address: 00:13:49:DF:42:A8
initialize ch =20, ethernet address: 00:13:49:DF:42:A8
initialize ch =21, ethernet address: 00:13:49:DF:42:A8
initialize ch =22, ethernet address: 00:13:49:DF:42:A9
initialize ch =23, ethernet address: 00:13:49:DF:42:A9
initialize ch =24, ethernet address: 00:13:49:DF:42:A9
initialize ch =25, ethernet address: 00:13:49:DF:42:A9
initialize ch =26, ethernet address: 00:13:49:DF:42:A9
Press ENTER to continue...