EasyManua.ls Logo

ZyXEL Communications NWA5123-NI - 10.2 Radio

ZyXEL Communications NWA5123-NI
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 9 MON Profile
NWA5000 / WAC6000 Series User’s Guide
108
The following table describes the labels in this screen.
9.3 Technical Reference
The following section contains additional technical information about the features described in this
chapter.
Rogue APs
Rogue APs are wireless access points operating in a network’s coverage area that are not under the
control of the network’s administrators, and can open up holes in a network’s security. Attackers
can take advantage of a rogue AP’s weaker (or non-existent) security to gain access to the network,
or set up their own rogue APs in order to capture information from wireless clients. If a scan reveals
a rogue AP, you can use commercially-available software to physically locate it.
Table 53 Configuration > Object > MON Profile > Add/Edit MON Profile
LABEL DESCRIPTION
Activate Select this to activate this monitor mode profile.
Profile Name This field indicates the name assigned to the monitor mode profile.
Channel dwell time Enter the interval (in milliseconds) before the NWA/WAC switches to another channel
for monitoring.
Scan Channel Mode Select auto to have the NWA/WAC switch to the next sequential channel once the
Channel dwell time expires.
Select manual to set specific channels through which to cycle sequentially when the
Channel dwell time expires. Selecting this options makes the Scan Channel List
options available.
Set Scan Channel
List (2.4 GHz)
Move a channel from the Available channels column to the Channels selected
column to have the NWA/WAC using this profile scan that channel when Scan Channel
Mode is set to manual.
These channels are limited to the 2.4 GHz range (802.11 b/g/n).
Set Scan Channel
List (5 GHz)
Move a channel from the Available channels column to the Channels selected
column to have the NWA/WAC using this profile scan that channel when Scan Channel
Mode is set to manual.
These channels are limited to the 5 GHz range (802.11 a/n). Not all NWA/WACs
support both 2.4 GHz and 5 GHz frequency bands.
OK Click OK to save your changes back to the NWA/WAC.
Cancel Click Cancel to exit this screen without saving your changes.

Table of Contents

Other manuals for ZyXEL Communications NWA5123-NI

Related product manuals