Chapter 4 Monitor
NWA5000 / WAC6000 Series User’s Guide
49
4.4 Radio List
Use this screen to view statistics for the NWA/WAC’s wireless radio transmitters. To access this
screen, click Monitor > Wireless > AP Information > Radio List.
Figure 22 Monitor > Wireless > AP Information > Radio List
The following table describes the labels in this screen.
Status This field displays the current status of the physical port.
Down - The physical port is not connected.
Speed / Duplex - The physical port is connected. This field displays the port speed and
duplex setting (Full or Half).
TxPkts This field displays the number of packets transmitted from the NWA/WAC on the physical
port since it was last connected.
RxPkts This field displays the number of packets received by the NWA/WAC on the physical port
since it was last connected.
Collisions This field displays the number of collisions on the physical port since it was last connected.
Tx This field displays the transmission speed, in bytes per second, on the physical port in the
one-second interval before the screen updated.
Rx This field displays the reception speed, in bytes per second, on the physical port in the
one-second interval before the screen updated.
Up Time This field displays how long the physical port has been connected.
System Up Time This field displays how long the NWA/WAC has been running since it last restarted or was
turned on.
Table 22 Monitor > Network Status (continued)
LABEL DESCRIPTION
Table 23 Monitor > Wireless > AP Information > Radio List
LABEL DESCRIPTION
More
Information
Click this to view additional information about the selected radio’s wireless traffic and
station count. Information spans a 24 hour period.
Status This displays whether or not the radio is enabled.
To Next Page
Loading...
