EasyManua.ls Logo

ZyXEL Communications P-330W - Wireless Advanced Settings; Advanced Wireless Options

ZyXEL Communications P-330W
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
Wireless Advanced Settings
Authentication Type Open System
If your access point/wireless router is using "Open
" authentication, then the wireless adapter will need to be set to the
same authentication type.
Shared Key: Shared Key is when both the sender and the
recipient share a secret key.
Auto: Select Auto Switch for the adapter to automatically select the
appropriate
Preamble Type
A preamble is a signal used in wireless environment to synchronize the
transmitting timing including Synchronization and Start frame delimiter.
(Note: If you want to change the Preamble type into Long or Short, please
check the setting of AP.)
Broadcast SSID
Enable: This wireless AP will broadcast its SSID to stations.
Disable: This wireless AP will not broadcast its SSID to stations. If stations
want to connect to this wireless AP, this AP’s SSID should be known in
advance to make a connection.
IAPP
IAPP (Inter Access Point Protocol) is designed for the enforcement
of unique association throughout a ESS (Extended Service Set) and
a secure exchange of station’s security context between current
access point (AP) and new AP during handoff period.
Enable: Clcik to enable the function.
Disable: Click to disable the function.
Save
After completing the settings on this page, click Save to save the
settings.
Reset
Click Reset to restore to default values.

Other manuals for ZyXEL Communications P-330W

Related product manuals