10
Using Wireless Protected Setup
(WPS)
If your wireless devices display the WPS logo, you
can use Wi-Fi Protected Setup (WPS) to add
wireless devices to your wireless network. If your
wireless devices do not display the WPS logo, go to
Set Up a Wireless Network on page 5 to manually set up a wireless
network.
You must enable the WPS function before using the WPS button.
1. Log into the Web Configurator (see page 5 for more information).
Then click Network Settings > Wireless > WPS to go to the WPS
screen.
2. Select Enable and click Apply.
To Next Page
Loading...
