Chapter 5 Powerline Network Setup Tutorial
PLA Series User’s Guide
41
Figure 24 Adding an Adapter to an Existing Network
4 Click Write and click OK on the pop-up.
Figure 25 Network Name Pop-up
5 Your new adapter will now have the same Network Name as your existing network and so has
now joined your existing network.
6 Connect the adapter to the device you want to add to the network, for example, your Internet
refrigerator in the kitchen.
7 Plug the adapter’s power cord into a power outlet and, if required, switch the power outlet on.
8 Repeat this procedure for all additional powerline adapters that you want to add to your existing or
new powerline network.
5.5 Setting Up a New Network with a New Adapter
This section shows you how to use your new powerline adapters to set up a new powerline network
separate to your existing network.
The figure below shows two powerline networks in a house. The first network (1) shows the home
computer connected to a printer and access to the Internet. The second network (2) has no
Internet access but with a media adapter such as the ZyXEL DMA-1100P you can use your TV to
watch movies and play games which are stored on a computer.
To Next Page
Loading...
