ZyXEL Communications PLA4211 - Setting up Multiple Networks

Chapter 3 The RESET/ENCRYPT Button
PLA4211 User’s Guide
19
5 Then repeat steps 2 and 3 in this section using any powerline device (A or B) you have connected
using ENCRYPT and the powerline device you want to connect (C). You must use the RESET/
ENCRYPT button on both devices.
Figure 8 Adding More Powerline Adapters to Your Network
6 If you disconnected your computer or modem (or any other networking product connected to your
powerline device) in step of this section, you can now reconnect them.
This sets up your powerline network between your powerline devices.
3.3 Setting Up Multiple Networks
You can use the RESET/ENCRYPT button to set up multiple powerline networks using your
existing powerline network.
A
B
OR
C
AB