Chapter 6 Powerline Network Setup Tutorial
PLA4231 User’s Guide
48
Figure 28 Adding an Adapter to Your New Network
4 Click Save.
• If you do not type the DAK password or type it incorrectly the following pop-up appears. Click
OK and type the DAK Password correctly in the DAK Password field.
Figure 29 Incorrect DAK or No DAK
• If you have correctly entered the DAK Password, click OK on the pop-up.
Figure 30 Correct DAK
5 The adapter will disappear from the table of your existing network.
Figure 31 Adapters on Your Existing Network
To Next Page
Loading...
