Chapter 9 Monitor
PLA4231 User’s Guide
64
The following table describes the labels in this screen.
You can configure which logs to display in the View Log screen. Go to the Log Setting screen and
select the logs you wish to display. Click Apply to save your settings. Click Cancel to start the
screen afresh.
Figure 40 Monitor > Log Setting
9.4 Packet Statistics
Click the Packet Statistics (Details...) hyperlink in the Dashboard screen or Monitor > Packet
Statistics. Read-only information here includes port status, packet specific statistics and the
"system up time". The Poll Interval(s) field is configurable and is used for refreshing the screen.
Figure 41 Monitor > Packet Statistics
Table 14 Monitor > Log
LABEL DESCRIPTION
Display Select what logs you want to see from the Display drop list. The log choices depend on
your settings in the Log Setting screen.
Refresh Click Refresh to renew the log screen.
Clear Click Clear to delete all the logs.
# This field is a sequential value and is not associated with a specific entry.
Time This field displays the time the log was recorded.
Message This field states the reason for the log.
To Next Page
Loading...
