Chapter 7 Introducing the Web Configurator
PLA4231 User’s Guide
56
The following table describes the labels in this screen.
Note: The management session automatically times out when the time period set in the
Administrator Inactivity Timer field expires (default five minutes; go to Chapter
13 on page 91 to change this). Simply log back into the PLA4231 if this happens.
Right after you log in, the Dashboard screen is displayed. See Chapter 4 on page 81 for more
information about the Dashboard screen.
7.3 Navigating the Web Configurator
The following summarizes how to navigate the web configurator from the Dashboard screen.
Figure 37 Status Screen of the Web Configurator
As illustrated above, the Web Configurator screen is divided into these parts:
Table 11 Change Password Screen
LABEL DESCRIPTION
New Password Type a new password.
Retype to Confirm Retype the password for confirmation.
Apply Click Apply to save your changes back to the PLA4231.
Ignore Click Ignore if you do not want to change the password this time.
To Next Page
Loading...
