Chapter 10 Wireless LAN
PLA4231 User’s Guide
79
Click Network > Wireless LAN > QoS. The following screen appears.
Figure 51 Network > Wireless LAN > QoS
The following table describes the labels in this screen.
10.9 WPS Screen
Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS
status. To open this screen, click Network > Wireless LAN > WPS tab.
Table 24 Network > Wireless LAN > QoS
LABEL DESCRIPTION
WMM QoS Select Enable to have the PLA4231 automatically give a service a priority level
according to the ToS value in the IP header of packets it sends. WMM QoS (Wifi
MultiMedia Quality of Service) gives high priority to voice and video, which makes
them run more smoothly.
Note: If you select 802.11n, 802.11gn or 802.11bgn in the Wireless LAN > General
screen, this field is not configurable and the PLA4231 automatically enables
WMM QoS.
Apply Click Apply to save your changes to the PLA4231.
Cancel Click Cancel to reload the previous configuration for this screen.
To Next Page
Loading...
