ZyXEL Communications PLA4231 - Page 93

Chapter 13 Maintenance
PLA4231 User’s Guide
93
Figure 62 Maintenance > Time
he following table describes the labels in this screen.
Table 33 Maintenance > Time
LABEL DESCRIPTION
Current Time and Date
Current Time This field displays the time of your PLA4231.
Each time you reload this page, the PLA4231 synchronizes the time with the time
server.
Current Date This field displays the date of your PLA4231.
Each time you reload this page, the PLA4231 synchronizes the date with the time
server.
Time and Date Setup
Manual Select this radio button to enter the time and date manually. If you configure a new
time and date, Time Zone and Daylight Saving at the same time, the new time and date
you entered has priority and the Time Zone and Daylight Saving settings do not affect
it.
New Time
(hh:mm:ss)
This field displays the last updated time from the time server or the last time
configured manually.
When you select Manual, enter the new time in this field and then click Apply.
New Date
(yyyy/mm/dd)
This field displays the last updated date from the time server or the last date configured
manually.
When you select Manual, enter the new date in this field and then click Apply.
Get from Time
Server
Select this radio button to have the PLA4231 get the time and date from the time
server you specified below.
User Defined Time
Server Address
Enter the IP address or URL (up to 20 extended ASCII characters in length) of your
time server. Check with your ISP/network administrator if you are unsure of this
information.