Chapter 13 Maintenance
PLA4231 User’s Guide
95
Figure 63 Maintenance > Firmware Upgrade
The following table describes the labels in this screen.
Note: Do not turn off the PLA4231 while firmware upload is in progress!
After you click Upload, wait two minutes before logging into the PLA4231 again.
The PLA4231 automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 64 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Dashboard screen.
Table 34 Maintenance > Firmware Upgrade
LABEL DESCRIPTION
Firmware Upgrade
File Path Type in the location of the file you want to upload in this field or click Browse... to find it.
Browse... Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Upload Click Upload to begin the upload process. This process may take up to two minutes.
On-line Firmware Upgrade
Check for Latest
Firmware Now
Click this button to get the latest firmware information, such as the version number, release
date, release note and file size from the ZyXEL website. Make sure your PLA4231 has
Internet access.
Do-
Firmware_Upgra
de
Click this button to download and install the latest firmware in your PLA4231.
To Next Page
Loading...
