Chapter 4 G.hn Network Setup Tutorial
PLA6457 User’s Guide
32
4.5 Setting Up a New Network with a New PLA
This section shows you how to use your new PLAs to set up a new G.hn network separate to your existing
network.
The figure below shows two G.hn networks in a house. The first network (1) shows the home computer
connected to a printer and access to the Internet. The second network (2) has no Internet access but
with a media adapter such as the Zyxel DMA-1100P you can use your TV to watch movies and play
games which are stored on a computer.
Figure 20 Add New Adapters to Make a Second Network
1 Connect your new PLA and open the Web Configurator as shown in Section 4.5 on page 32. The screen
shown below appears.
2 Type a Domain Name that is different from the Domain Name for your existing network. Make sure you
use the same new Domain Name for all new adapters you want to add to your new network.
To Next Page
Loading...
