Chapter 5 Log
PM7516-R0 / PM7116-R0 User’s Guide
23
5.2 Log
Use the System Log screen to see the system logs. You can filter the entries by selecting a severity level
and/or category. Click System Monitor > Log to open the System Log screen.
Figure 13 System Monitor > Log
The following table describes the fields on this screen.
Table 9 System Monitor > Log
LABEL DESCRIPTION
Category Select the type of logs to display.
Level Select a severity level from the drop-down list box. This filters search results according to the
severity level you have selected. When you select a severity, the Zyxel Device searches through
all logs of that severity or higher.
Refresh Click this to renew the log screen.
Clear Logs Click this to delete all the logs.
Export Click this to export the selected log(s).
# This field is a sequential value and is not associated with a specific entry.
Time This field displays the time the log was recorded.
Level This field displays the severity level of the log.
Message This field states the reason for the log.
To Next Page
Loading...
