ZyXEL Communications PM7516-R0 - Chapter 8 User Account; Overview; User Account

PM7516-R0 / PM7116-R0 User’s Guide
29
CHAPTER 8
User Account
8.1 Overview
In the User Account screen, you can view the settings of the admin user account that you use to log in
the Zyxel Device.
8.2 User Account
Click Maintenance > User Account to open the following screen.
Figure 17 Maintenance > User Account
The following table describes the labels on this screen.
Table 13 Maintenance > User Account
LABEL DESCRIPTION
User Name This field displays the name of the account used to log into the Zyxel Device Web Configurator.
Old Password Type the default password or the existing password used to access the Zyxel Device Web
Configurator.
New Password Type your new system password (up to 256 characters). Note that as you type a password, the
screen displays a (*) for each character you type. After you change the password, use the new
password to access the Zyxel Device.
Retype to
Confirm
Type the new password again for confirmation.
Apply
Click this to save your changes and to apply them to the Zyxel Device.
Undo Click Undo to exit this screen without saving.