Chapter 11 Firmware Upgrade
PM7516-R0 / PM7116-R0 User’s Guide
34
After you see the firmware updating screen, wait a few minutes before logging into the Zyxel Device
again.
The Zyxel Device automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 21 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the System Info screen.
File Path Click Choose File and navigate to the location of the .bin file you want to upload. Remember
that you must decompress compressed (.zip) files before you can upload them.
Upload Click this to begin the upload process. This process may take up to two minutes.
Table 16 Maintenance > Firmware Upgrade
LABEL DESCRIPTION
To Next Page
Loading...
