ZyXEL Communications UAG4100 - Scenario 3 - BWM Controls Trial and Billing Users

ZyXEL – UAG Support Notes
26
All contents copyright (c) 2013 ZyXEL Communication Corporation
Scenario 3 - BWM Controls Trial and Billing Users
3.1 Application scenario
In the hotel network hotspot applications, the UAG4100 can support different
bandwidth controls by different SSIDs. We can use this design like NXC, SSID mapping
to a VLAN. Then VLAN can be mapped to an IP address subnet. In this scenario, we
add 2 SSIDs and enable the Free Time function on the device, and also add the Billing
profiles on the device. After adding the policy to limit the user bandwidth via BWM
function, we can login to the device via a trial-user or billing-user account to check
the speed controlled by the UAG4100.
Guest room
VIP room
SSID: Billing
Speed: 2M
SSID: Free
Speed: 1M
3.2 Configuration Guide
Network Conditions
UAG4100:
WAN1: 10.59.3.54
LAN2: 172.17.0.1
Goal to Achieve
UAG4100 can support adding of rules on the device to control different user types by
the BWM function for controlling the bandwidth based on a user account.
Task 1: Add the AP profiles on the device.
Step 1: Go to Configuration > Object > AP Profile > SSID > SSID list.
(1) Modify the default SSID name as “Free”.