ZyXEL – UAG Support Notes
48
All contents copyright (c) 2013 ZyXEL Communication Corporation
3. Go to the path where you can save the log file and view the log.
USB Device
USG4100 Configuration
Task . Store the system log on a USB device.
Step 1: Plug-in an external USB storage device and activate the USB storage service to
store the system log. USB storage devices with FAT16, FAT32, EXT2, or EXT3
file systems are supported for connection to the USB port of the UAG4100.
Also, you have to set a disk full warning limit once the storage space is less
than this criterion.
Step 2: Check if the status of USB storage is ready at Monitor > USB Storage >
Storage Information.
To Next Page
Loading...
