ZyXEL – UAG Support Notes
42
All contents copyright (c) 2013 ZyXEL Communication Corporation
Task 2. Use the White List function to manage the client’s side, as well as the ability
to access the online printer.
Step 1: Using IP/MAC Binding to make sure the Printer IP is correct host.
Configuration > Network > IP/MAC Binding > lan1
(1) Enable IP/MAC Binding.
(2) Insert the Printer IP binding with the correct MAC address.
Stepv2: Configuration > Network > Layer2 Isolation > White List
(1) Enable White List.
(2) Add the White List rule with Host IP address: 172.16.1.1 to allow the client’s
laptop to connect to the Printer.
To Next Page
Loading...
