ZyXEL – UAG Support Notes
53
All contents copyright (c) 2013 ZyXEL Communication Corporation
Goal to Achieve
Use the AP profile function to manage and control multiple APs with multiple SSIDs
in many places with large areas.
USG4100 Configuration
Task 1. Configure the VLAN interface to allow two SSIDs that can belong to different
VLANs.
Step 1: Configuration > Network > Interface > VLAN
(1) Add an internal VLAN based on the LAN 2 port, and set the VLAN ID: 10.
(2) Set the VLAN interface IP address as 172.88.10.1/24.
To Next Page
Loading...
