ZyXEL Communications VMG8324-B10A series User Manual

Chapter 6 Wireless
VMG8324-B10A / VMG8324-B30A Series User’s Guide
90
The following table describes the labels in this screen.
6.8 The Others Screen
Use this screen to configure advanced wireless settings. Click Network Setting > Wireless >
Others. The screen appears as shown.
See Section 6.10.2 on page 94 for detailed definitions of the terms listed in this screen.
Figure 46 Network Setting > Wireless > Others
The following table describes the labels in this screen.
Table 27 WDS: Scan
LABEL DESCRIPTION
Wireless Bridge Scan Setup
Refresh Click Refresh to update the table.
# This is the index number of the entry.
SSID This shows the SSID of the available wireless device within range.
BSSID This shows the MAC address of the available wireless device within range.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.
Table 28 Network Setting > Wireless > Others
LABEL DESCRIPTION
RTS/CTS
Threshold
Data with its frame size larger than this value will perform the RTS (Request To Send)/CTS
(Clear To Send) handshake.
Enter a value between 0 and 2347.
Fragmentation
Threshold
This is the maximum data fragment size that can be sent. Enter a value between 256 and
2346.
Auto Channel
Timer
If you set the channel to Auto in the Network Setting > Wireless > General screen,
specify the interval in minutes for how often the Device scans for the best channel. Enter 0
to disable the periodical scan.

ZyXEL Communications VMG8324-B10A series Specifications

General

Brand	ZyXEL Communications
Model	VMG8324-B10A series
Category	Wireless Router
Language	English