38/255
Configure Secure Gateway IP as the Branch’s WAN IP address (in the example,
172.100.20.30). Then, type a secure Pre-Shared Key (8-32 characters).
Set Local Policy to be the IP address range of the network connected to the
ZyWALL/USG (HQ) and Remote Policy to be the IP address range of the network
connected to the ZyWALL/USG (Branch).
Figure 55 Quick Setup > VPN Setup Wizard > Wizard Type > VPN Settings
(Configuration)
This screen provides a read-only summary of the VPN tunnel. Click Save.
To Next Page
Loading...
